Removing The System Board - Dell OptiPlex 7000 Small Form Factor Service Manual

19. M.2 2230/2280 solid-state drive slot
20. Processor socket
21. I/O cable

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5-inch
5. Remove the 3.5-inch
6. Remove the hard-drive and optical-drive
7. Remove the expansion
8. Remove the solid-state
9. Remove the WLAN card.
10. Remove the heat-sink and fan
11. Remove the memory modules.
12. Remove the processor.
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
before working inside your
hard-drive.
hard-drive.
cage.
card.
drive.
assembly.
computer.
Removing and installing components 73