Dell OptiPlex 7000 Small Form Factor Service Manual page 82

Table 5. System setup options—System information menu (continued)
General-System Information
Processor L2 Cache
Processor L3 Cache
HT Capable
64-Bit Technology
Device Information
SATA-0
SATA-1
M.2 PCIe SSD-2
LOM MAC Address
Video Controller
Audio Controller
Wi-Fi Device
Bluetooth Device
Boot Sequence
Boot Sequence
Boot List Option
UEFI Boot Path Security
Always,Except Internal HDD
Always
Never
Date/Time
Table 6. System setup options—System Configuration menu
System Configuration
Integrated NIC
Enable UEFI Network Stack
SATA Operation
Drives
SATA-0
SATA-1
M.2 PCIe SSD-2
SMART Reporting
USB Configuration
Enable USB Boot Support
Enable front USB Port
Enable rear USB Port
Front USB Configuration
82 BIOS setup
Displays the Processor L2 Cache size.
Displays the Processor L2 Cache size.
Displays whether the processor is HyperThreading (HT) capable.
Displays whether 64-bit technology is used.
Displays the SATA device information of the computer.
Displays the SATA device information of the computer.
Displays the M.2 PCIe SSD information of the computer.
Displays the LOM MAC address of the computer.
Displays the video controller type of the computer.
Displays the audio controller information of the computer.
Displays the wireless device information of the computer.
Displays the Bluetooth device information of the computer.
Displays the boot sequence.
Displays the available boot options.
Enable or disable the system to prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 boot menu. Default: Enabled
Enable or disable the system to prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 boot menu. Default: Disabled
Enable or disable the system to prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 boot menu. Default: Disabled
Displays the current date in MM/DD/YY format and current time in HH:MM:SS
AM/PM format.
Controls the on-board LAN controller.
Enable or disable UEFI Network Stack.
Configure operating mode of the integrated SATA hard drive controller.
Enable or disable various drives on board.
Displays the SATA device information of the computer.
Displays the SATA device information of the computer.
Displays the M.2 PCIe SSD information of the computer.
Enable or disable SMART Reporting during system startup.
Enable or disable booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
Enable or disable the front USB ports.
Enable or disable the rear USB ports.
Enable or disable the front USB ports.