Keyboard; Virtualization - Dell OptiPlex 7000 Small Form Factor Service Manual

Table 26. System Management (continued)
Options
Wake on LAN
Wake on LAN
Auto On Time
Auto On Time
SERR Messages
First Power On Date

Keyboard

This section provides keyboard settings.
Table 27. Keyboard
Options
Enable keyboard Error Detection
Numlock LED

Virtualization

This section provides details on Virtualization settings.
96 BIOS setup
Description
This field allows the user to select if and how the system
should boot when connected to LAN. The options here are as
follows:
● Disabled - The system will not boot with any special LAN
signals (selected by default).
● LAN only - Allows the system to be powered on by a
special LAN signal from a network computer.
● WLAN only - Allows the system to power on by special
WLAN signals.
● LAN or WLAN - Allows the system to power on by special
LAN or wireless LAN signals.
● LAN with PXE Boot - Allows the system to wake-up from
S4 or S5 state and boot to PXE.
This field allows the user to set defined days/time when the
sytem can automatically power on. The options here are as
follows:
● Disabled (selected by default)
● Everyday
● Weekdays
● Select Days
This section allows the user to enable or disable(ON/OFF) the
SERR message mechanism (ON by default).
NOTE: Some graphics cards require SERR message
mechanism to be disbaled.
This option if enabled lets the user see the ownership date
(disabled by default).
Description
This field contains a toggle switch(ON/OFF) to allow the
keyboard-related errors to be reported when the system
boots.
This field contains a toggle switch(ON/OFF) to allow the user
to decide if the Numlock LED should be on when the system
boots.