5. Remove the
3.5-inch
6. Remove the
hard-drive and optical-drive
7. Remove the
WLAN
card.
About this task
The following images indicate the location of the external WLAN antennas and provide a visual representation of the removal
procedure.
Steps
1. Remove the nut and washer from the two antenna heads.
2. Gently pry and remove the antenna heads from the chassis.
3. Remove the antenna cables from routing point on the system board.
4. Lift and remove the antenna-module from the system.
hard-drive.
cage.
Removing and installing components
49
Need help?
Do you have a question about the OptiPlex 7000 Small Form Factor and is the answer not in the manual?
Questions and answers