Dell OptiPlex 7000 Small Form Factor Service Manual page 84

Table 9. System setup options—Secure Boot menu (continued)
Secure Boot
Expert Key Management
Custom Mode Key Management
Table 10. System setup options—Intel Software Guard Extensions menu
Intel Software Guard Extensions
Intel SGX Enable
Enclave Memory Size
Performance
Multi Core Support
Intel SpeedStep
C-States Control
Intel TurboBoost
HyperThread control
Power Management
AC Recovery
Enable Intel Speed Shift Technology
Auto On Time
USB Wake Support
Deep Sleep Control
Wake on LAN/WLAN
Block sleep
POST Behavior
Numlock LED
Keyboard Errors
Fastboot
Extend BIOS POST Time
Full Screen Logo
Warnings and Errors
84 BIOS setup
Enable or disable Expert Key Management.
Select the custom values for expert key management.
Enable or disable Intel Software Guard Extensions.
Set the Intel Software Guard Extensions Enclave Reserve Memory Size.
Enable multiple cores.
Default: Enabled.
Enable or disable Intel Speedstep Technology.
Default: Enabled.
NOTE: If enabled, the processor clock speed and core voltage are adjusted
dynamically based on the processor load.
Enable or disable additional processor sleep states.
Default: Enabled.
Enable or disable Intel TurboBoost mode of the processor.
Default: Enabled.
Enable or disable HyperThreading in the processor.
Default: Enabled.
Sets what action the computer takes when power is restored.
Enable or disable Intel Speed Shift Technology.
Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays or Selected Days.
Default: Disabled.
Enable the USB devices to wake the computer from Standby.
Enables you to control the Deep Sleep mode support.
Enables the computer to be powered on by special LAN signals.
Enables you to block entering to sleep mode in OS environment.
Enables the NumLock function when computer boots.
Enables the keyboard error detection.
Enable to set the speed of the boot process.
Default: Thorough.
Configure additional pre-boot delay.
Enable or disable to display full screen logo.
Sets the boot process to pause when Warnings or Errors are detected.