Set The Sip Port; Set The Register; Set The Register Port - NEC MH240 Setup Manual

Set the SIP Port:

Factory Default: 5070 (SIP Port1)
STEP1: Go to "Config" menu.
STEP2: Press
STEP3: Edit SIP Prort and then press "OK" soft key.
STEP4: Press

Set the Register:

Factory Default: 172.16.0.10
STEP1: Go to "Config" menu.
STEP2: Press
STEP3: Edit Register (IP Address or FQDN) and then press "OK" soft key.
STEP4: Press

Set the Register Port:

Factory Default: 5070
STEP1: Go to "Config" menu.
STEP2: Press
STEP3: Edit Register Port and then press "OK" soft key.
STEP4: Press
(See "PLACE THE PHONE IN CONFIG
to go to SIP Port1 edit screen.
to save.
(See "PLACE THE PHONE IN CONFIG
to go to Register edit screen.
to save.
(See "PLACE THE PHONE IN CONFIG
to go to Register Port edit screen.
to save.
24
MODE")
SIP Port1
5070
12 OK
MODE")
Register
172.16.0.10
12 OK
MODE")
RegisterPort
5070
12 OK
Clear
Clear
Clear