Lifting Of Loads - ABB A140-H56 Operation Manual

Operation Manual / A130-H.. - A140-H..
2 Safety
2.8

Lifting of loads

Figure 5
Suspended loads
Loads that are not attached according to regulations can cause physical inju-
ries with grave consequences or fatal accidents.
WARNING
Fasten assemblies or individual parts above 25 kg carefully on properly

functional lifting gear with a sufficient load limit.
Pay attention to the correct attachment of loads on the crane hook.

No persons must remain under suspended loads.

Figure 6
If there are two or more suspension points, the attachment angle of 45° must not be excee-
ded. This prevents excessive loading due to diagonal pull.
Attach components of the turbocharger as described in the respective action steps.

Before looping around the components of the turbocharger, let them cool down (maximum

80 °C).
Use a suitable edge guard if there are sharp edges.

The assembly devices must be completely screwed in and must not unscrew during use.

Use assembly devices only for the described applications.

Put down dismantled components of the turbocharger in such a way that they cannot tip

over.
© Copyright 2013 ABB. All rights reserved. HZTL2414_EN
Page 18 / 115
Revision B
March 2013