Operation Manual / A130-H.. - A140-H..
10
Disassembly and assembly
10.3
Removing / Installing air-inlets
Removing air-inlets
Figure 28
Loop around the filter silencer (81000) with lifting gear.
Loosen V-clamp (72020) and remove filter silencer (81000) with O-ring (81010) or air suc-
tion branch (82000) with O-ring (82010).
Installing air-inlets
Fit the filter silencer (81000) or air suction branch (82000) with the V-clamp (72020).
(Table of tightening torques [➙ 103])
© Copyright 2013 ABB. All rights reserved.
HZTL2414_EN
Page 86 / 115
Revision B
March 2013