Warning Plates On The Turbocharger; Safe Operation And Maintenance - ABB A140-H56 Operation Manual

Operation Manual / A130-H.. - A140-H..
2 Safety
2.3

Warning plates on the turbocharger

Warning plates are affixed at the following locations on the turbocharger:
Figure 2: ≤ A145
If warning plates are not present in the designated locations or not readable, proceed as
follows:
Order new warning plates from ABB Turbocharging Service Stations.

Remove any warning plates that have become unreadable.

Clean and degrease the areas designated for the warning plates.

Attach the new warning plates.

Non-insulated turbochargers
Turbochargers supplied to the enginebuilder without insulation must be equipped later with
warning plates to be attached to the insulation. This is the responsibility of the enginebuilder.
2.4

Safe operation and maintenance

The instructions specified in this section are for the safety of personnel. Together with the in-
structions in section "Hazards during operation and maintenance" of this chapter, they allow
the user to safely use the turbocharger.
© Copyright 2013 ABB. All rights reserved. HZTL2414_EN
Page 8 / 115
Revision B
March 2013