Operation Manual / A130-H.. - A140-H..
10
Disassembly and assembly
Measurement of N and R
Figure 44
The measured average values must lie within the admissible values of radial clearance N and
R.
Radial clearances N and R [mm]
N
R
Table 32
Clearances outside the tolerance
Serious damage to engines or property can be caused by clearances outsi-
de the tolerance and excessively worn parts.
CAUTION
Have the components assessed and, if necessary, replaced by an ABB
Turbocharging Service Station.
© Copyright 2013 ABB. All rights reserved.
A130
0.26 ... 0.60
0.34 ... 0.70
0.45 ... 0.70
0.51 ... 0.85
A135
A140
0.45 ... 0.90
0.64 ... 1.00
HZTL2414_EN
Page 101 / 115
- -
- -
- -
Revision B
March 2013