Operation Manual / A130-H.. - A140-H..
4
Removal and installation
4
Removal and installation
4.1
Transport
Suspension of complete turbocharger unit
Figure 13
1a
Turbocharger with oil-cooled bearing casing
1b
Turbocharger with water-cooled bearing casing
2
Complete turbocharger unit with gas outlet casing
4.2
Turbocharger weight
Lifting gear with a sufficient load limit must be used for removing and installing the turbochar-
ger. The following weight specification applies to the heaviest variant possible. Depending on
the specification, the weight specified on the rating plate may be lower than the standard value
specified here.
Complete turbocharger
A130
190
Table 1
© Copyright 2013 ABB. All rights reserved.
Weights [kg]
A135
270
HZTL2414_EN
A140
460
Revision B
Page 29 / 115
- -
- -
March 2013