Operation Manual / A130-H.. - A140-H..
2
Safety
Occupational safety and safety at the workplace
Risk of falling
When working on the turbocharger, there is a risk of falling.
WARNING
Do not climb onto the turbocharger or onto attached parts and do not use
them as climbing aids.
Use suitable climbing aids and working platforms for work above body
height.
Comply with the general accident prevention regulations.
Only perform work on the turbocharger when you are in a physically and psychologically
stable condition.
Wear appropriate protective equipment, such as:
Helmet
Hearing protection
Safety goggles
Safety gloves
Safety boots
Protective clothing
Hair net (for long hair)
Respirator mask
Only work with suitable tools and with equipment and appliances that function properly.
Power tools must be properly earthed and cables must be undamaged.
Keep the workplace clean; clear away any loose objects and obstacles on the floor.
Keep the floor, equipment, and turbocharger clean.
Have oil binding agents ready and provide or keep oil pans at hand.
Clean up any spills.
Have fire protection means and extinguishing agents available.
Welding work
When performing welding work above the turbocharger, always cover the filter silencer to
prevent the filter mat from being damaged.
Keep flammable objects and substances out of the vicinity of flying sparks.
Cover all connections on the turbocharger so that no foreign objects can enter the tur-
bocharger.
© Copyright 2013 ABB. All rights reserved.
HZTL2414_EN
Page 9 / 115
Revision B
March 2013