Connecting To Vlpro; Figure 2-5: Network Configuration Sub-Menu - evertz 7800 Manual

7800 MultiFrame Manual
7880DEC-MP2HD-2 Dual HD MPEG-2 Decoder

Figure 2-5: Network Configuration Sub-Menu

From the Main Menu select option (2) SNMP Configuration. Select option (1) Set IP Address and enter
the IP address of your VLPro Server. Exit using option (S) Save and Exit, now extract the card from the
rack, remove the serial cable and re-insert it.
You have now completed the necessary minimum configuration and can connect the cables to the rear
card when ready.
2.4.

CONNECTING TO VLPRO

This chapter assumes that the VLPro server and VLPro client are already configured for your network
and you have basic knowledge of the VLPro interface. It also assumes that the user or network
administrator has already added the 7880DEC-MP2HD-2 jar file to the server and both the client and
server applications have been restarted. If you are the network administrator refer to section 6.2 for
information on updating the VLPro Server Jar File.
Open VLPro and click on the refresh tree icon. Expand the hardware tree by clicking on the "+" symbol.
Your 7880DEC-MP2HD-2 should appear as a newly listed device with the IP address used to configure
the card in Step 1 above. It may take up to a minute to appear while the card and switch negotiate
network settings (this can be verified directly on the switch if necessary).
7880DEC-MP2HD-2 - 8
Revision 1.0