Additional Materials - Heartland VALUE Series Assembly Manual

• If you purchased a separate floor kit, use instructions and materials in that kit to construct your floor.

• See the FLOOR LEVELING section on page 9 for recommended methods and suggested materials to properly level your floor,

as this will vary depending on your specific site.

REINFORCED WOOD FLOOR FRAME (OPTIONAL)

IMPORTANT! Depending on your specific use you may want to construct a heavy duty floor frame by adding additional floor joists

(shown below as shaded). Below is a list of additional materials (not included):

2 x 4 x 10' (5,1 x 10,2 x 304,8 cm) Treated Lumber

cut to 2 x 4 x 117" (5,1 x 10,2 x 297,2 cm)

3" (7,6 cm) hot-dipped galvanized nails

ADDITIONAL MATERIALS

FOUNDATION OR FLOOR MATERIALS

Standard 16" (40,5 cm) spacing

Optional 12" (30,5 cm) spacing

Table of Contents