Advertisement
• If your shed came with a separate floor kit, then please use the instructions supplied with that kit to assemble your floor.
• See the FLOOR LEVELING section on page 11 for recommended methods and suggested materials to properly level your floor,
as this will vary depending on your specific site.
• If you will be building your own floor, below are the materials that you'll need.
MATERIAL REQUIRED:
x2
2 x 4 x 12' (5,1 x 10,2 x 365,8 cm)
x10
2 x 4 x 12' (5,1 x 10,2 x 365,8 cm)
cut to 2 x 4 x 141" (5,1 x 10,2 x 358,1 cm)
Hot Dipped Galvanized Box-Type Nails.
x40
REINFORCED WOOD FLOOR FRAME (OPTIONAL)
IMPORTANT! Depending on your specific use you may want to construct a heavy duty floor frame by adding additional floor joists
(shown below as shaded). Below is a list of additional materials (not included):
x3
2 x 4 x 12' (5,1 x 10,2 x 365,8 cm) Treated Lumber
cut to 2 x 4 x 141" (5,1 x 10,2 x 358,1 cm)
x12
3" (7,6 cm) hot-dipped galvanized nails
ADDITIONAL MATERIALS
FOUNDATION OR FLOOR MATERIALS
WOOD FLOOR FRAME (Not Included)
Use only wood treated for ground contact and fasteners approved for use with treated wood.
3" (7,6 cm)
Optional 12" (30,5 cm) spacing
Standard 16" (40,6 cm) spacing
3
Advertisement
