COLLAR TIE
PARTS REQUIRED:
x6
3" (7,6 cm)
x1
TM
2 x 4 x 72" (5,1 x 10,2 x 182,9 cm)
BEGIN
1
Install collar tie TM to the 2nd rafter from the back wall with (3) 3" nails at each end.
3" (7,6 cm)
TM
Nails
Flush to panel
Flush to panel
HINT: For best appearance,
install collar tie on back
side of rafter.
FINISH
Your collar tie is now installed.
47