Heartland VALUE Series Assembly Manual page 31

PARTS REQUIRED:
x1
Roof panels may cause serious injury until securely fastened.
Note: Install all roof panels with the rough side up (painted grid lines).
BEGIN
1
Place the 48" x 96" panel on rafters with a
1/2" measurement on the gable end rafter
(Fig. A), and with the panel flush
at the peak (Fig. B).
Secure panel with (1) 2" nail in each corner.
2
Move to the opposite end.
Using the long edge of the panel as a lever,
move the panel side-to-side until the top corner
is flush to the peak (Fig. B) and there is a 1/2"
measurement on the gable end rafter (Fig. C).
Secure panel with (1) 2" nail in each corner.
(1,2 cm)
Fig. C
ROOF PANELS
7/16 x 48 x 96"
(1,1 x 121,9 x 243,8 cm)
Two Nails
1/2"
Gable
End Rafter
3/4" GAUGE
BLOCK
Two Nails
Flush at
peak
Fig. B
29
x4
2" (5,1 cm)
Flush at
Fig. B
(1,2 cm)
Fig. A
Gable
End Rafter
peak
1/2"