Heartland VALUE Series Assembly Manual page 10

If you choose to install your kit on a concrete slab refer to the diagram below.
Attach the sill plates on the foundaton as shown, and continue on to page 11.
C
B
C
(10,2 cm)
Building Size
10'x8' (304,8 x 304,8 cm)
10' x 8' Building Requires:
x2
2 x 4 x 10' (5,1 x 10,2 x 304,8 cm)
x1
Caulk
Allow new concrete slabs to cure for at least seven (7) days.
• A treated 2 x 4" (5,1 x 10,2 cm) sill plate is required when installing your shed on concrete.
Purchase full length treated lumber, or butt shorter pieces end-to-end and seal seams with caulk.
• Use a high quality exterior grade caulk beneath all sill plates.
• Fasten 2 x 4" (5,1 x 10,2 cm) sill plates to slab using approved concrete anchors (fasteners not included).
• Check local code for concrete foundation requirements.
CONCRETE FOUNDATION
B
4"
Actual Floor Size
10'x8' (304,8 x 304,8 cm)
D
D
D
D
3-1/2"
(8,9 cm)
A B
120" (304,8 cm) 89" (226,1 cm)
x2
2 x 4 x 8' (5,1 x 10,2 x 304,8 cm)
Cut down to: 89" (226,1 cm)
8
Treated Sill Plate
Caulk between
sill plate and
concrete.
A
A
A
Sill plates must be treated lumber.
C
96" (243,8 cm) 153-11/16" (476,1 cm)
D