Step 3: Pre-Update Check - Cardinal Health Kendall SCD 700 Manual

5.3 Step 3: Pre-Update Check

19
Step 3: Pre-Update Check
 Press the On/Standby button
to turn on the Kendall SCD 700
series controller
Step 3 (continued): Pre-Update
Check
 Several seconds after the
Controller has been turned on,
the Kendall SCD
will notify the user that the
"Pre-update function check
has passed".
 Press the On/Standby button
to turn off the Kendall SCD
700 series controller.
 Check "Confirm controller
has been turned off".
 Select "Next" to proceed to the
next screen.
TM
700 Updater
TM