Cardinal Health Kendall SCD 700 Manual page 55

Note: There should be adequate working space and sufficient outlets necessary
for proper operation of the personal computer and the Kendall SCD 700 series
controller.
2 Installing the Software Updater for the Kendall SCD
700 Series Controller on the Personal Computer
The following section provides step by step instructions for the Software Updater
for the Kendall SCD 700 series controller (herein after referred to as Kendall
TM
SCD 700 Updater) installation.
 Log into the computer that will serve as the service personal
computer.
 Place the CD containing the Kendall SCD 700 Updater into the CD
drive of the personal computer.
5
 Select "Run
DeviceManagementIns
tallation.exe"
 If CD does not
automatically start
installation, manually
locate and select the CD
and select "Run
DeviceManagementInsta
llation.exe"
 If asked "Do you want to
allow the following
program from an
unknown source
publisher to make
changes to this
computer?" Select
"Yes".