Kaiser KA 2 Series User Manual page 80

77
80
EN
Note!
Due to the difference of the
temperature of the unit and the actual
indoor temperature, the Air Conditioner
when in DRY mode will automatically
operate many times without running the
COOL and FAN mode.
TIMER Operation
• Push TIMER ON button to set the
auto- on time and TIMER OFF
button to set the auto-off time.
To set the starting time
• Push the TIMER ON button, then
the remote controller shows TIMER
ON , the last set time for the starting
operation and the signal
shown on the DIGITAL DISPLAY
area. You are now ready to reset the
time to START the operation.
• Push the TIMER ON button again to
set desired unit start time.
• After setting the TIMER ON ,there
will be a one-half second delay
before the remote
transmits the signal
c o n d i t i o n e r . T h e n , a f t e r
approximately another 2 seconds,
the signal disappears and the set
h
temperature will re-appear on the
digital display.
To set the stopping time.
• Push the TIMER OFF button and
the remote controller will show
TIMER OFF, the last set time for the
stopping operation and the signal
will be shown on the DIGITAL
DISPLAY area. You are now ready
to reset the time of the STOP
operation.
• Push the TIMER OFF button again
to set the time you want to stop the
operation.
• After setting the TIMER OFF ,there
will be a one-half second delay
before the remote controller
transmits the signal to the air
c o n d i t i o n e r . T h e n , a f t e r
approximately another 2 seconds,
the signal disappears and the set
h
temperature will re-appear on the
digital display.
set
will be
h
controller
to the air
h