Table of Contents
Advertisement
5
8
EN
Attention!
•
Install according to this installation
instructions strictly. If installation is
defective, it will cause water
leakage, electrical shock fire.
•
Use the attached accessories parts
and specified parts for installation,
otherwise, it will cause the set to fall,
water leakage, electrical shock fire.
•
Install at a strong and firm location
which is able to withstand the set s
weight. If the strength is not enough
or installation is not properly done,
the set will drop and cause injury.
•
For electrical work, follow the local
national wiring standard, regulation
and this installation instructions. An
independent circuit and single outlet
must be used. If electrical circuit
capacity is not enough or defect
found in electrical work, it will cause
electrical shock fire.
•
Use the specified cable and connect
tightly and clamp the cable so that
no external force will be acted on the
terminal. If connection or fixing is not
perfect, it will cause heat-up or fire at
the connection.
•
Wiring routing must be properly
arranged so that control board cover
is fixed properly. If control board
cover is not fixed perfectly, it will
cause heat-up at connection point of
terminal, fire or electrical shock.
Advertisement
Table of Contents
