Table of Contents
Advertisement
75
78
EN
Note!
In the AUTO mode, the air conditioner
can logically choose the mode of COOL,
FAN and HEAT by sensing the difference
between the actual ambient room
temperature and the set temperature on
the remote controller.
If the AUTO mode is not comfortable for
you, the desired mode can be selected
manually.
COOL/ HEAT
(Cooling only model
without)
and FAN Operation
• If the AUTO mode is not comfortable,
you may manually over-ride the
settings by using COOL, HEAT or
FAN modes.
• Push the TEMP button to set the
desired room temperature. When in
C O O L I N G m o d e , t h e m o s t
comfortable settings are 21 C or
above. When in HEATING mode, the
most comfortable settings are 28 C or
below.
• Push the FAN SPEED to select the
FAN mode of AUTO, HIGH, MED or
LOW.
• Push the ON/OFF button, the
operation lamp
lights and the air
conditioner start to operate as your
settings. Push the ON/OFF button
again to stop this unit operation.
Note!
The FAN mode can not be used to control
the temperature. While in this mode, only
steps 1, 3 and 4 may be performed.
DRY Operation
• Push the MODE button to select DRY.
• Push the TEMP button to set the
desired temperature from
28°С
.
• Push the ON/OFF button, the
OPERATION lamp lights and the air
conditioner starts to operate in DRY
mode at LOW fan speed. Push the
ON/OFF button again to stop this unit
operation.
21°С
up to
Advertisement
Table of Contents
