Kaiser KA 2 Series User Manual page 70

Fan
Auto
Cool High
Dry Med
Heat Low
1
Mode Fan Speed
3
Swing Sleep Timer On
4
Timer Off
Reset Lock
5
Air Clean LED
Direction Air Display Turbo
6
67
70
2
EN
REMOTE CONTROLLER
Rated Voltage – 3,0 V; (LR03×2)
Lowest Voltage of CPU Emitting Signal –
2,0 V
Transmission Distance– 8m (when using
3 0 , B voltage, it gets 11m)
Environment – -5 С ° ~ + 60 °С
Performance Features
Operating Modes: AUTO, COOL, DRY,
HEAT(only for models with cooling and
heating) and FAN.
• Timer Setting Function in 24 hours.
• Indoor Setting Temperature Range:
°С 30 °С – .
• Full function LCD Display.
Buttons functions
Features of Remote controller buttons
TEMP –
Button: push this button to
1.
decrease the indoor temperature setting;
TEMP +
Button: push this button to
2.
increase the indoor temperature setting;
MODE
Selection Button: each time
3.
the button is pressed, the operation mode
is shifted in the direction of the arrow:
AUTO COOL DRY
; " "
FAN ;
?
SWING
Button: press this button, the
4.
louver would swing automatically. Press it
again, it would stop moving;
RESET
Button: when
5.
button is pushed, all of the current
settings are cancelled and the control will
return to the initial settings;
AIR DIRECTION
Button: press this
6.
button to initiate the directional (upward or
downward) swing feature of the louver.
The swing angle of the louver is 6° for
each press. When the louver swing at a
certain angle which would affect the
cooling and heating effect of the air
conditioner, it would automatically change
the swing direction (upward or
downward);
7
HEAT
" "
the RESET