Table of Contents
Advertisement
51
54
EN
Optimal operation
To achieve optimal performance, please
note the following:
• Adjust the air flow direction correctly
so that it is not directed on people.
• Adjust the temperature to achieve the
highest comfort level. Do not adjust
the unit to excessive temperature
levels.
• Close doors and windows on
or
HEAT
modes, or performance may
be reduced.
• Use
TIMER ON
button on the remote
controller to select a time you want to
start your air conditioner.
• Do not put any object near air inlet or
air outlet, as the efficiency of the air
conditioner may be reduced and the
air conditioner may stop running.
• Clean the air filter periodically,
otherwise cooling or heating
performance may be reduced.
• Do not operate unit with horizontal
louver in closed position.
CARE AND MAINTENANCE
Cleaning the Grille, Case and Remote
Controller
• Turn off the system before cleaning.
To clean, wipe with a soft, dry cloth.
Do not use bleach or abrasives.
Note!
Supply power must be
disconnected before cleaning the indoor
unit.
Attention!
• A cloth dampened with cold water
may be used on the indoor unit if it is
very dirty. Then wipe it with a dry cloth.
• Do not use a chemically treated cloth
or duster to clean the unit.
• Do not use benzine, thinner, polishing
powder, or similar solvents for
cleaning. These may cause the plastic
surface to crack or deform.
• Never use water hotter than 40 ° /
104 °F to clean the front panel, it could
cause deformation of discoloration.
COOL
С
Advertisement
Table of Contents
