Auto
Fan
Cool
High
Dry
Med
Heat
Low
Mode
Fan Speed
8
Swing
Sleep
Timer On
11
Timer Off
Reset Lock
13
Air
Clean
LED
Direction
Air
Display
Turbo
7
69
72
9
10
12
14
15
EN
CLEAN AIR
Button: this button is
7.
used to activate the function of Plasma
Dust Collector, or Ionizer, or UV light
(depending on models). Push it again
to stop the function;
ON/ OFF
Button: push this button to
8.
start operation, push the button again to
stop operation;
Fan Speed
Button: Used to select the
9.
Fan Speed in four steps AUTO, LOW,
MED or HIGH. Each time the button is
pressed, the fan speed mode is shifted;
Timer ON
Button: push this button to
10.
initiate the auto-on time sequence. Each
press will increase the auto-timed setting
in 30 minutes increments;
Sleep
Button: push this button to go
11.
into the Energy-Saving operation mode.
Press it again to cancel. This function is
only can be used on COOL, HEAT and
AUTO mode and maintain the most
comfortable temperature for you;
Note!
While the unit is running under
Sleep
operation mode, it would be
canceled if you press the other button.
Timer OFF
Button: push this button to
12.
initiate the auto-off time sequence. Each
press will increase the auto-timed setting
in 30 minutes increments. When the
setting time displays 10:00, each press
will increase the auto-timed setting 60
minutes increments. To cancel the auto-
timed program, simply adjust the auto-off
time to 0:00;
Lock
Button: push this button to lock
13.
all the current settings, push again to
cancel the Lock function;
TURBO
Button: push this button on
14.
HEAT/COOL mode, the air conditioner
goes into powerful heating/cooling
operation. Push again to cancel the
TURBO function.
LED Display
Button: push this button
15.
to clear the digital display in the air
conditioner, press it again to activate it
(not applicable to units without this
function).