Kaiser KA 2 Series User Manual page 52

1
T, °
1 С/ 2 ° °F
1 С/ 2 ° °F
1 2 3
2
T, °
1 С/ 2 ° °F
1 С/ 2 °
1 2 3
49
52
3
T, hours
4 5 6 7
3
°F
t, hours
4 5 6 7
EN
• Do not move the horizontal louver
manually unless it is necessary.
Always use the remote controller.
• When the air conditioner is started
immediately after it was stopped,
the horizontal louver might not move
for approximately 10 seconds.
• Open angle of the horizontal louver
should not be set too small, as
C O O L I N G o r
performance may be impaired due
to too restricted air flow area.
• Do not operate unit with horizontal
louver in closed position.
• When the air conditioner is
connected to power (initial power),
the horizontal louver may generate
a sound for 10 seconds, this is a
normal operation.
How the air conditioner works
AUTO operation
When you set the air conditioner in
AUTO
mode, it will automatically select
cooling, heating(cooling/ heating
models only), or fan only operation
depending on what temperature you
h a v e s e l e c t e d a n d t h e r o o m
temperature.
The air conditioner will control room
temperature automatically round the
temperature point set by you.
AUTO
If the mode is uncomfortable,
you can select desired conditions
manually.
SLEEP operation
SLEEP
When you push
remote controller during cooling
heating (cooling & heating models
2
AUTO
only), or operation , the air
conditioner will automatically increase
(cooling) or decrease (heating)
°F per hour for the first 2 hours, then
hold steady for the next 5 hours, after
that it will switch off
characteristic maintains both energy
saving and comfort in night operation.
DRYING operation
The temperature is regulated while
dehumidifying by repeating turning on
and off of the cooling operation or fan
only. The fan speed is LOW.
H E A T I N G
button on
,
1
1 С/ 2 °
. This
3