Table of Contents
Advertisement
EN
Heating mode (For cooling and
heating models only)
The air conditioner draws in heat from the
outdoor unit and releases it via the indoor
unit during heating operation. When the
outdoor temperature falls, heat drawn in
by the air conditioner decreases
accordingly. At the same time, heat
loading of the air conditioner increases
due to larger difference between indoor
and outdoor temperature. If a comfortable
temperature can't be achieved by the air
conditioner, we suggest you use a
supplementary heating device.
Auto-restart function
Power failure during operation will stop
the unit completely.
For the unit without Auto-restart feature,
when the power restores, the
OPERATION indicator on the indoor unit
starts flashing. To restart the operation,
push the ON/OFF button on the remote
controller. For the unit with Auto-restart
feature, when the power restores, the unit
restarts automatically with all the previous
settings preserved by the memory
function.
For some models, the machine is special
designed with Auto-restart function for the
open angle of the horizontal louver.
Power failure during operation or pressing
the ON/ OFF button on the remote
controller will stop the unit completely.
When the power restores or pressing the
ON/ OFF button on the remote controller
again,the unit restarts automatically with
all the previous settings including the
open angle of the horizontal louver by the
memory function. So we strongly suggest
that the open angle of the horizontal
louver should not be set too small, in case
the condensed water forms and drops
from the horizontal louver. Press the
AUTO/ COOL button under the front
panel and the open angle of the horizontal
louver will be restored to the standard
angle when the condensed water forms
on the horizontal louver.
61
64
Advertisement
Table of Contents
