22 | DRY 3.4 | Advanced Operation (key-operator mode)
Changing the configuration settings
Topics:
•
Accessing the Change settings menu
•
Changing the General settings
•
Changing the input tray settings (upper / lower)
•
Changing Network (DICOM) configuration
•
Changing the image quality settings
2604A EN 20180322 1454
Note: Each time the settings have been changed, the new
configuration is automatically stored on the hard disk of the
printer. You will be asked to create a back-up floppy with the
new settings.
Note: Newer versions of the printer have a Compact flash card
(CF-card) reader instead of a floppy disk drive. This manual
describes how to use a floppy disk. The usage of a CF-card is
analogous.