AGFA DRY 3.4 Reference Manual page 45

The current interpolation setting for the selected modality is marked with
an *.
6. Press the Up/Down arrow keys to select the desired Interpolation setting
for this modality.
• If you select "Cubic Hi-Res" the following screen will appear, allowing
you to adjust the smoothing factor:
• If you select "CubicBell" the following screen will appear, allowing you
to adjust the smoothing factor:
7. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Changing Image quality setting for a modality - Changing the
maximum density (Dmax)
1. On the 'Change setting' screen, press the Down key four times, followed by
the Confirm key to select 'Image quality'.
The following screen will appear:
2. Press the Up/Down arrow keys to select the modality for which you want
to change the image quality settings.
The 'Image quality' screen for the selected modality is displayed:
DRY 3.4 | Advanced Operation (key-operator mode) | 45
WARNING:
The user should be aware that the interpolation values differ
when the A#Sharp feature is deactivated. The A#Sharp
feature, which is a technology that enhances the image
sharpness, is active by default. For more information about
(de)activating the A#Sharp feature, refer to the Service
manual.
on page 23
2604A EN 20180322 1454