AGFA DRY 3.4 Reference Manual page 74

74 | DRY 3.4 | Advanced Operation (key-operator mode)
1. Press the Confirm key to continue.
An instruction screen will show the information you need to complete this
part of the installation:
2. Press the Confirm key to continue.
The 'Enter printer IP-address' screen is displayed:
Figure 3: e.g. 10.233. 93. 46
If the IP-address has already been assigned, it will be shown on the
display.
3. Press the Up/Down arrow keys to increment/decrement the numbers.
Press the Left/Right arrow keys to move through the fields.
Example: If the IP-address is 120.000.120.120, then the data entry should
be as follows:
Example: If the IP-address is 120.0.120.120, then the data entry should be
as follows:
2604A EN 20180322 1454
Note: When no DHCP server is available and when the IP
address of the printer has never been set, the printer IP
address will be set to the APIPA address 169.254.10.10.
Note: Note that blank spaces will not be filled in.