AGFA DRY 3.4 Reference Manual page 82

82 | DRY 3.4 | Advanced Operation (key-operator mode)
3. Remove the floppy disk and press the Confirm key.
The following screen is displayed:
4. Press the Confirm key.
The installation is now finished.
The following screen is displayed:
5. Press the Confirm key.
The following screen is displayed:
6. Press the Escape key if you want to reboot the printer later. Press Confirm
key to reboot the printer.
The printer will now restart, and the new settings will be active.
2604A EN 20180322 1454