AGFA DRY 3.4 Reference Manual page 38

38 | DRY 3.4 | Advanced Operation (key-operator mode)
12. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The 'Select preferred film type for <daily name or AE-title>' screen will
appear:
13. Press the Up/Down arrow keys to select the preferred film type for this
modality.
In case the current film type in the trays does not match the selected film
type the following message is displayed:
14. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The data entry for the new modality is finished now.
The printer will ask you if you want to add another modality:
15. If you wish to add another modality, select Yes and press the Confirm key.
2604A EN 20180322 1454
Note: Activated output trays are marked with an *.
Note: Mammography film is only shown in the list when the
option for the mammography application is activated.
Note: You can find the film type on the film packaging.