Table of Contents
Advertisement
104 | DRY 3.4 | System Description
Transport after installation
The printer is equipped with wheels so that moving the printer over a short
distance - if required - can be done in a convenient way.
1. Unlock both wheel brakes on the right and left hand sides.
2. Move the printer to its destination.
3. Relock the wheels by pressing the brakes down.
2604A EN 20180322 1454
WARNING:
Always keep in mind the following safety guidelines:
• During movement of the printer take care that stability is
always ensured. Special attention should be paid to possible
obstructions, and to uneven or slant surfaces.
• Never transport the printer with open doors.
• Make sure that both front wheel brakes are unlocked.
Advertisement
Table of Contents
