AGFA DRY 3.4 Reference Manual page 75

4. Press the Confirm key to continue, or the Escape key to return to the
previous step.
The 'Enter Netmask' screen is displayed:
If the net mask has already been assigned, it will be shown on the display.
Note: When no DHCP server is available and when the
subnet mask of the printer has never been set, the subnet
mask will be set to the APIPA address 255.255.0.0.
5. Press the Up/Down arrow keys to increment/decrement the numbers.
Press the Left/Right arrow keys to move through the fields.
Note: Note that blank spaces will not be filled in.
Example: If the netmask is 120.000.120.120, then the data entry should be
as follows:
Example: If the netmask is 120.0.120.120, then the data entry should be as
follows:
6. Press the Confirm key to continue, or the Escape key to return to the
previous step.
The 'Enter Router IP-address' screen is displayed:
DRY 3.4 | Advanced Operation (key-operator mode) | 75
2604A EN 20180322 1454