Table of Contents
Advertisement
118 | DRY 3.4 | Problem solving
Film transport jams in the print section
The following screen indicates that a jam occurred in the print section of the
film transport system.
To remove a jammed film in the print section of the transport system:
1. Open the drum compartment door by pulling its handle.
2. Check if you can locate a film visually between the vertical lift and the
print head.
• If the film is visible,
• If the film is not visible, it has fallen behind the vertical lift.
2604A EN 20180322 1454
proceed with step 3.
Proceed with step 4.
Advertisement
Table of Contents
