Table of Contents
Advertisement
15. Press the Confirm key to continue.
Related Links
Data entry
on page 11
Saving the configuration
A screen will ask you to insert the back-up floppy:
1. Insert the floppy disk.
The drive is located at the rear of the printer.
For the back-up, a blank floppy disk is required (formatted, IBM-
compatible, 2HD).
2. Press the Confirm key to continue.
The 'Saving configuration' screen is displayed.
The printer saves the configuration on the floppy disk.
When the writing process has finished, the following screen is displayed:
DRY 3.4 | Advanced Operation (key-operator mode) | 81
2604A EN 20180322 1454
Advertisement
Table of Contents
