Table of Contents
Advertisement
70 | DRY 3.4 | Advanced Operation (key-operator mode)
Figure 2: Print head data
13. Press the Confirm key to continue, or the Escape key to quit.
The printer will copy the new software data onto the hard disk.
14. When the contents of the floppy is copied onto the hard disk, the following
message asks you to insert the next floppy (if a next one is required):
15. Remove the floppy disk and insert the next floppy disk ('disk x/y') when
necessary. Press the Confirm key to continue.
2604A EN 20180322 1454
Note:
In case a wrong disk has been inserted, the following
message is displayed:
Note:
In case no floppy has been inserted, the following message is
displayed:
Advertisement
Table of Contents
