Changing The Configuration Settings - AGFA Drystar 5302 Reference Manual

D 5302 R
RYSTAR EFERENCE MANUAL

Changing the configuration settings

A number of data and parameters settings of the printer can be viewed and
changed by using the 'change settings' function.
Note that some configuration settings are only adjustable via a remote browser PC:
For more information about controlling the Drystar 5302 via a remote browser PC,
refer to the chapter
on page 151.
Each time the settings have been changed, the new configuration is automatically
saved on the hard disk of the printer. You will be asked to create a back-up CF-card
with the new settings.
Change settings
General
'Changing the date and time'
'Changing the language'
'Changing the beep on empty tray settings'
'Changing the site-specific data (via remote browser only)'
Upper and lower input tray (procedures are identical for both trays)
'Changing the film view'
'Changing the film type'
'Changing the film format'
Network (DICOM)
'Changing the printer AE-title'
'Changing the hostname'
'Changing the domain name'
'Changing the printer IP address'
'Changing the netmask'
'Changing the router IP address'
'Removing a modality'
66
Advanced operation (Key-operator mode)
• Via the LOCAL keypad, you can access only the MAIN features.
• Via a REMOTE connection, you can access ALL features.
'Controlling the Drystar 5302 via a remote PC (with browser)'
Page
70
71
72
73
74
75
76
78
79
80
81
83
84
85
2830A EN 20050526