AGFA DRY 3.4 Reference Manual page 33

3. Press the Up/Down arrow keys to increment/decrement the numbers.
Press the Left/Right arrow keys to move through the fields. Press the
Confirm key to store the data.
Example: If the IP-address is 120.000.120.120, then the data entry should
be as follows:
Example: If the IP-address is 120.0.120.120, then the data entry should be
as follows:
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Data entry on page 11
Changing the Netmask
1. On the 'Change setting' screen, press the Down key three times, followed
by the Confirm key to select 'Network Dicom'.
The 'Network Dicom' screen is displayed:
2. On the 'Network-Dicom' screen, press the Down key four times, followed
by the Confirm key to select 'Netmask'.
DRY 3.4 | Advanced Operation (key-operator mode) | 33
Note: When no DHCP server is available and when the IP
address of the printer has never been set, the printer IP
address will be set to the address 169.254.10.10.
Note: Note that blank spaces will not be filled in (see
examples on the next page).
on page 23
2604A EN 20180322 1454