Checking Floppy Disk Error Messages - AGFA DRY 3.4 Reference Manual

Checking floppy disk error messages

If the printer is not printing your job, you should check the front panel display
to see if the printer is indicating an error status.
A floppy disk error can occur when the inserted floppy disk is full, write
protected or when no floppy disk is inserted.
Correct the error following the error message on the screen:
After you have corrected the action the screen will disappear.
Note: Newer versions of the printer have a Compact flash card
(CF-card) reader instead of a floppy disk drive. This manual
describes how to use a floppy disk. The usage of a CF-card is
analogous.
DRY 3.4 | Problem solving | 111
2604A EN 20180322 1454