AGFA DRY 3.4 Reference Manual page 44

44 | DRY 3.4 | Advanced Operation (key-operator mode)
Accessing the Change settings menu
Removing a modality
Changing Image quality setting for a modality - Changing the
Interpolation
1. On the 'Change setting' screen, press the Down key four times, followed by
the Confirm key to select 'Image quality'.
The following screen will appear:
2. Press the Up/Down arrow keys to select the modality for which you want
to change the image quality settings.
The 'Image quality' screen for the selected modality is displayed:
3. Do one of the following:
• If you want to attribute the default profile, select 'Profile default' and
• If you want to add a custom profile, select 'Select other' and press the
4. The 'Image quality' screen for the selected modality is displayed:
5. On the 'Image quality' screen press the Down key once, followed by the
Confirm key to select 'Interpolation'.
The 'Interpolation' screen for the selected modality is displayed:
2604A EN 20180322 1454
on page 35
press the Confirm key.
You will return to the first screen.
Confirm key.
on page 23