Changing The General Settings - AGFA DRY 3.4 Reference Manual

Changing the General settings

Topics:
• Changing the date and time
• Changing the language
• Changing the sorter configuration
• Changing the assignment modality - output tray
• Changing the beep on empty tray settings
Changing the date and time
1. On the 'Change setting' screen, press the Confirm key to select 'General'.
The 'General' screen is displayed:
2. Press the Confirm key to select 'Date and time'.
The 'Date and time' screen is displayed:
3. Press the Up/Down arrow keys to increment/decrement the numbers.
Press the Left/Right arrow keys to move through the digits.
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Data entry on page 11
Changing the language
1. On the 'Change setting' screen, press the Confirm key to select 'General'.
The 'General' screen is displayed:
DRY 3.4 | Advanced Operation (key-operator mode) | 25
on page 23
2604A EN 20180322 1454