ZinWave UNITIVITY 5000 User Manual page 88

UNItivity 5000
User Manual
2. You need to insert the tip of the device into the hole as the button is set in from the front
face. The Hub restarts and the LEDs flash. The Hub is returned to the default IP address
and configuration settings:
•
IP Address: default 192.168.0.2
•
Sub Net: Default 255.255.255.0
•
Gateway: Default 192.168.0.1
•
Passwords: Advanced: supervisor
•
NTP Settings: default disabled
•
Alarm Settings: default condition Fault
Configure as desired as described throughout this manual.
Copyright © 2022 Zinwave. All rights reserved.
Additional System Setup
11-16