UNItivity 5000
User Manual
To change the IP address of the standalone PC:
1. Set the standalone PC to use a static IP address on the same subnet e.g. 192.168.0.3, with
a subnet mask of 255.255.255.0.
2. Make an Ethernet connection from the standalone PC to the Primary Hub (either a crossover
or straight-through Ethernet cable can be used).
3. Access the GUI as
change the IP address. See
Copyright © 2022 Zinwave. All rights reserved.
"Accessing the GUI"
described in
"IP
Settings".
Understanding the Configuration GUI
and go to the Hub Setup page to
9-3