Optical Safety Precautions; Software Installation - ZinWave UNITIVITY 5000 User Manual

Optical Safety Precautions

Warning: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Caution: Do not remove the fiber Port dust covers unless the port is in use. Do not stare
directly into a fiber Port.
Caution: Cover any unconnected fiber ends with an approved cap.
Caution: Do not stare with unprotected eyes at any broken ends of the fiber.
Caution: Use only approved methods for cleaning optical fiber connectors.
Caution: Do not make any unauthorized modifications to this fiber optical system.
Caution: No warning signs are required as it is a Class 1 hazard.
Caution: Use Class 1 test equipment.

Software Installation

Caution: When new firmware is being installed it is very important not to break or interrupt
the connection between source file and the Hub. Interrupting firmware installation may put
the Hub into an irrecoverable state that requires factory reset.
Caution: While the system can be configured with poor optical links present, this may affect
the system performance and such links should be examined and brought into specification
in order to obtain optimum performance.
Copyright © 2022 Zinwave. All rights reserved. ix