Specifications - ZinWave UNITIVITY 5000 User Manual

UNItivity 5000
User Manual

15 Specifications

System RF Parameters
System Bandwidth (Part No.
305-XXXX)
System Bandwidth (Part No.
306-XXXX)
System Band Gain Flatness
Wideband Gain Flatness
Downlink
Gain (Part No. 305-0XXX)
Gain (Part No. 305-1007)
(higher power remote has
increased gain)
Gain (Part No. 306-XXXX)
RF Input Power to Service
Module
RF output power at Remote
Unit Tx port (Part No. 305-
0007)
RF output power at Remote
Unit Tx port (Part No. 305-
1007)
RF output power at Remote
Unit Tx port (Part No. 306-
0007)
Uplink
Gain (Part No. 305-0XXX)
Gain (Part No. 305-1007)
(higher power remote has
increased gain)
Gain (Part No. 306-XXXX)
RF input level to Remote Unit
Rx port
RF output power from Service
Module
Fiber Optic
Number of optical ports
Wavelength
Copyright © 2022 Zinwave. All rights reserved.
150 MHz to 2700 MHz
3300 MHz to 4200 MHz
±1 dB
-5 dB / +1 dB
25 dB (max)
29 dB (max)
29 dB (max)
-25 dBm (min) to
+15 dBm (max)
+20 dBm/+18 dBm
+20 dBm/+18 dBm (F < 1575
MHz) and simultaneously
+23 dBm/+21 dBm (F > 1575
MHz)
+22 dBm
25 dB (max)
29 dB (max)
29 dB (max)
+10 dBm (max)
+5 dBm (max)
Up to 8 duplex ports supported on Primary Hub (Optical Modules); 9 duplex
ports on Secondary Hub; 1 duplex port on Remote Unit; SC-APC / SC-APC
connectors
1310 nm
In any 100 MHz band
1dB steps
1 dB steps
1dB steps
Working input power to Service Module
Composite Power at Remote Unit Output for
services approved to FCC / CE
Composite Power at Remote Unit Output for
services approved to FCC / CE
Composite Power at Remote Unit Output for
services approved to CE
1 dB steps
1 dB steps
1 dB steps
Overload condition. Signal internally limited
to -20dBm max by Remote Unit Uplink AGC
Output power of Service Module in Hub
Specifications
15-1