System Status; System Status Topology Tree And Modules; Unit And Module Details; Event Log - ZinWave UNITIVITY 5000 User Manual

UNItivity 5000
User Manual

10.4 System Status

The System Status page displays the topology of the Distributed Antenna System and the status/details
of all the individual elements comprising the DAS. Configuration changes must be made via the System
Setup page.
10.4.1

System Status Topology Tree and Modules

The following color coding is used for Units in the Topology Tree and any associated Modules:
•
– Functional
Green Icon
•
– Hardware or Service Warning
Amber Icon
•
– Loss of Service / Fault
Red Icon
•
Black Icon – Disconnected link (to RU or optical module)
•
& Black Numeric – Module disabled by User
Grey Icon
•
Grey Icon & Grey Numeric
•
– Indicates an Optical Loop Back (OLB) present
Blue Icon
The Icons alongside each Unit in the Topology Tree show the status of its Optical Links:
•
– Optical loss within usable range
Green Icon
•
– Optical loss at upper end of usable range – clean connections
Amber Icon
•
– Optical loss out of specification – link must be improved
Red Icon
•
– Optical loss not yet measured
Blue Icon
10.4.2

Unit and Module Details

When the System Status tree is expanded, it is possible to click on each item in the tree to see its
current properties, such as measured power levels and alarm status. All discovered Units and the
Modules in the Primary Hub are displayed:
•
Primary Hub (PH):
o
Service Module (SM) - Provides interface for RF services from BTS, etc. The table
also shows input Transport Modules (TMs)
o
Optical Module (OM) - Provides optical links to a Secondary Hub or Remote Unit.
The table also shows any output Transport Modules (TMs).
•
Secondary Hub (SH):
•
Remote Unit (RU):
•
Downstream Primary Hub (PH0x):
to receive Services from this Primary Hub (a.k.a. UniTransport Hub).

10.5 Event Log

The event log page provides a history of the last 500 events recorded by the Hub.
In this page, the user can "Download Event Log" as an event/log text file and "Download System Log"
as a rawlog.zip compressed text file. This zipped file contains at least 15 minutes of system logging
Copyright © 2022 Zinwave. All rights reserved.
– Empty slot or Module not present
Head-end of DAS, interfacing Services to SHs and/or RUs
Fans out optical links from the PH to up to 8 Remote Units per SH.
Provides RF connections to antennas for Tx/Rx to RF devices.
The tree shows other Primary Hubs that are connected
Initial System Setup
10-7