Installation - Structural Concepts Oasis mobile Series Installation And Operating Manual

INSTALLATION

1. Removing Case Shipping Brackets That Are
Attached To Skid

Disconnect screws holding Case Shipping
Brackets to skid.
 Remove Case Shipping Brackets from Skid.
 See illustration #4.
3. Removing Case from Skid
A. Place ramp up against skid (to allow case to smoothly slide off from skid).
B. Be certain to maintain support of case at all times or center of gravity may cause case to fall.
C. Slide unit to rear of skid. Slide down ramp and off from skid.

Note:Illustration below reflects general outline of sample case and may not reflect your particular
model or options chosen).
Case Shipping
Brackets. (4)
Carefully Slide Skid
Out From Under Unit
2. Caster Locking Operation
 To lock casters push down on lever. To
unlock, pull up the lever all the way.
Locked
5
Unlocked
Support
case while
removing
from skid.
Ramp