Toshiba nv Series Instruction Manual page 121

■Thick Cable: For trunk line
Maker: Rockwell Automation
Product name
1m with connector
2m with connector
3m with connector
5m with connector
10m with connector
50m without connector
150m without connector
300m without connector
■Thin Cable: For trunk line, drop line
Maker: Rockwell Automation
Product name
1m with connector
2m with connector
3m with connector
150m without connector
300m without connector
600m without connector
■Tap, Multiport tap
Maker: Rockwell Automation
Product name
T-Port Tap
DeviceBox Tap 2 Port
DeviceBox Tap 4 Port
DeviceBox Tap 8 Port
Main and branch cables connected to DeviceBox Tap are loose wires for open type connectors.
Catalog No.
1485C-P1N5-M5
1485C-P2N5-M5
1485C-P3N5-M5
1485C-P5N5-M5
1485C-P10N5-M5
1485C-P1-A50
1485C-P1-A150
1485C-P1-A300
Catalog No.
1485R-P1M5-C
1485R-P2M5-C
1485R-P3M5-C
1485C-P1-C150
1485C-P1-C300
1485C-P1-C600
Catalog No.
1485P-P1N5-MN5R1
1485P-P2T5-T5
1485P-P4T5-T5
1485P-P8T5-T5
Unified Controller nv Series DeviceNet Module DN912 Instruction Manual
Note
Shield mini connector on one side (male) and
Shield mini connector on the other side (female)
are included
Retrofit shield mini connector
871A-TS5-NM3 (male)
871A-TS5-N3 (female)
are attached
Note
Shield mini connector on one side (male)
Opposite side is for loose wire for open type
connector
Used for daisy chain connection from open
connector to open connector
Used when connecting from DeviceBox Tap to open
connector
Note
T branch (1 branch line from the main line)
Connect cables with shielded mini connectors for
both trunk and branch lines.
2 branch lines from the main line
4 branch line from the main line
8 branch line from the main line
C.1 Network components
105